Rotary Screen Printing Nickel Mesh
The nickel mesh has the characteristics of dense mesh, large aperture, good elasticity, should not be blocked slurry, etc., with higher printing speed, lower production costs, high utilization rate, is currently the international market of higher quality printing round mesh, you can enhance the process to obtain better printing results, while more economical paste, especially suitable for printing and printing industry to print any fine pattern pattern.
Product Features
1. Consistent quality: even and consistent printing color, beautiful printing pattern
2. Strong toughness: safe operation, long-lasting durability
3. High strength: long life of the printing machine mesh
4. Mesh holes are neat and precise: good permeability of output paste.
5. Uniform openings: good adhesion of photographic emulsion
Common round mesh specifications
| Table Of Contents |
Number Of Holes / cm2 |
Mesh Area (mm2) |
Mesh Diameter (mm) |
Thickness (mm) |
Hole Area / Total Area (%) |
| 25 |
120 |
0.2 |
0.480 |
0.2 |
24 |
| 40 |
290 |
0.07 |
0.285 |
0.11 |
20 |
| 60 |
670 |
0.02 |
0.152 |
0.1 |
18 |
| 80 |
1150 |
0.01 |
0.108 |
0.080 |
11 |
| 125 |
1630 |
0.006 |
0.083 |
0.080 |
9 |
Mesh size selection basis
Mesh number is the number of holes per unit area. Commonly used printing nickel mesh mesh 40, 60, 80, 100, 120, 125, 155, 165, 185, 255 and so on.
(1) The structure of the pattern: Fine pattern and line selection of larger mesh.
(2) The nature of the fabric: Thick fabrics absorb a large amount of pulp, should be selected with a small mesh net. Cotton fabrics with a smaller mesh net, chemical fibers and blended fabrics with a larger mesh net.
(3) The nature of the color paste: Color paste fluidity, can choose a large mesh.
(4) The speed of the printing machine speed, the color paste through the net rate is low, choose a small mesh.
Round Screen Printing
Electroplated nickel metal
Hexagonal structure
Reusable
The Scope of Product
1. Q: Why choose us?
A: We focus on copier and printer parts for more than 5 years. We integrate all resources and provide you with the most suitable products for long run business.
2. Q: What information should l let you know if l want to get a quotation?
A: 1.The size of the products (Length x Width).
2.Thickness in micron.
3.The material.
4.lt will be very useful if you can provide your bag's picture. Of course, samples will be best.
3.Q: How can l get the sample?
Usually we use the Courier service(UPS, TNT, Fedex, DHL, EMS), then it will take 5-7 days(depends on the distance) to reach your place.
4. Q: How much is the shipping cost?
Depends on the quantity, we would be pleased to check the best way and cheapest cost for you if you tell us your planning order quantity.
5. Q: How can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;
){kind=link}