Stamping Film
Stamping film, also known as aluminum carbide, is a kind of stamping material made by coating and vacuum evaporation plus a layer of metal foil on the film sheet base. The thickness of electrified aluminum is generally (12, 16, 18, 20) μm, 500 to 1500mm wide. Electrified aluminum foil is coated with a detachable layer, a color layer, and then coated with an adhesive layer by vacuum aluminizing on a thin film sheet, and finally made by rewinding the finished product.
Applications
Paper industry, plastic industry, cosmetic industry, artificial leather/textile industry, 3C products & home appliances, credit card face industry, bookbinding industry, etc.
Physical and Mechanical Properties
| Project |
Unit |
Typical value |
Test method |
| Thickness |
μm |
12~38 |
GB/T 6672 |
| Tensile Strength - MD |
MPa |
220 |
ASTM D882 |
| Tensile Strength - TD |
MPa |
220 |
ASTM D882 |
| Modulus of elasticity - MD |
MPa |
3800 |
ASTM D882 |
| Modulus of elasticity - TD |
MPa |
3800 |
ASTM D882 |
| Elongation at break - MD |
% |
100 |
ASTM D882 |
| Elongation at break - TD |
% |
100 |
ASTM D882 |
| Thermal Shrinkage - MD |
% |
0 |
ASTM D1204 (190ºC, 10min) |
| Thermal Shrinkage - TD |
% |
28 |
ASTM D1204 (190ºC, 10min) |
| Haze |
% |
3.5 |
ASTM D1003 |
| Glossiness |
% |
120 |
ASTM D2457 |
Requirements of hot stamping base film
1. good temperature resistance: to ensure that in the process of processing hot stamping film, the base film many times under tension through the 160 ºC oven does not deform, affecting the hot stamping;
2. high strength, high modulus: the base film in the role of tension will not produce tensile deformation, will not produce the neck shrinkage;
3. film flat, no longitudinal wrinkles: hot stamping film coated with color layer is mostly used in the suspension of the coating method, if there is a longitudinal wrinkles will produce a color difference;
4. Surface tension: the smaller the better, to facilitate the transfer of hot stamping completely;
Upright Packing Hanging Packing
1. Q: Why choose us?
A: We focus on copier and printer parts for more than 5 years. We integrate all resources and provide you with the most suitable products for long run business.
2. Q: What information should l let you know if l want to get a quotation?
A: 1.The size of the products (Length x Width).
2.Thickness in micron.
3.The material.
4.lt will be very useful if you can provide your bag's picture. Of course, sampleswill be best.
3.Q: How can l get the sample?
Usually we use the Courier service(UPS, TNT, Fedex, DHL, EMS), then it will take 5-7 days(depends on the distance) to reach your place.
4. Q: How much is the shipping cost?
Depends on the quantity, we would be pleased to check the best way and cheapest cost for you if you tell us your planning order quantity.
5. Q: How can we guarantee quality?
Always a pre-production sample before mass production; Always final Inspection before shipment;
){kind=link}