Advanced Slit-Type Coating System for Semiconductor Packaging Solutions

• Customization: Available
• Coating Application: Aerospace Industry, Automotive Industry, Construction Industry, Electronics Industry, Renewable Energy Industry
• Coating Color: Black, Blue, Gray, Green, Red, Transparent, White, Yellow
• Model NO.: XF
• Base Material Width: 500-1700mm
• Machine Speed: 4-40m/Min
• Accommodate Substrate Thickness: Max.250μm—min.50μm
• Application Area: Coating of Glue, Color Paste, etc.
• Specification: 16m*7m*2.8m
• Trademark: XWJ
• Origin: China
• HS Code: 8420100090
• Production Capacity: 200 Sets / Year
• Package Size: 1600.00cm * 700.00cm * 280.00cm
• Package Gross Weight: 100.000kg

Product Description

Slit Coater

It is a coating method in which the coating is extruded from the die head to coat the substrate. The coating thickness is determined by the amount of coating spit out from the die head and the running speed of the coated substrate.

The setting conditions for slit extrusion are the gap between the spit outlet and the spacing between the slit extrusion and the backing roller. As well as the coating supply method is pressurized and dosing pump method. In the past, it was mainly used for medium and high viscosity coating, but recently, it can also be used for low viscosity coating.

The coating liquid is applied to the substrate with a sealed-type applicator head without air bubbles, and there is basically no intrusion of coating defects and dust, etc. The liquid is supplied with the reservoir closed, and there is no change in concentration or viscosity, and there is little solvent evaporation, so that the operating environment is relatively good. It is possible to apply coatings with fillers and dye mixes.

 

Product Description

Technical Parameter

Coated substrates	PET
Substrate thickness	50-250μm
Substrate width	Maximum 2000mm
Roll surface width	2100mm
Machine speed	50m/min

Application range of equipment
------------------------------------
Coating of glue, color paste, etc., suitable for products with a wide range of viscosity.


  

Detailed Photos

 

 

Certifications

 

FAQ

1. Q: Why choose us?

A: We focus on copier and printer parts for more than 5 years. We integrate all resources and provide you with the most suitable products for long run business.

2. Q: What information should l let you know if l want to get a quotation?
A: 1.The size of the products (Length x Width).
2.Thickness in micron.
3.The material.
4.lt will be very useful if you can provide your bag's picture. Of course, samples will be best.

 

3.Q: How can l get the sample?

Usually we use the Courier service(UPS, TNT, Fedex, DHL, EMS), then it will take 5-7 days(depends on the distance) to reach your place.
 

4. Q: How much is the shipping cost?
Depends on the quantity, we would be pleased to check the best way and cheapest cost for you if you tell us your planning order quantity.

 

5. Q: How can we guarantee quality?

Always a pre-production sample before mass production; Always final Inspection before shipment;